Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Window Regulator Fuse Located in a Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Fuse box

The window regulator fuse of our second series Renault Clio is located inside the fuse box. The fuse box is situated in the engine compartment, in the bottom right corner. To access the fuse in question, start by opening the front bonnet. Then, unclip and remove the upper cover of the fuse box. Once you have removed the upper cover, you will have successfully accessed the fuse box and the window regulator fuse of our second series Renault Clio.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Car Radio Fuse in a Renault Clio
How to Replace the Car Radio Fuse in a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before you can start, sit in the driver's seat of your Renault Clio. Begin by prising off and removing the cover of the fuse box, located near the lo…
Where is the fuse box located in the Renault Clio
Where is the fuse box located in the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Inside the Renault Clio 4, there are two fuse boxes. The first box is located within the engine bay, near the battery. The second box is situated ins…
Where to find and how to access the fuse box of a Renault Clio?
Where to find and how to access the fuse box of a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Hello and welcome back to Scegliauto.com! Below, we will see how to find the fuse box of your Renault Clio. First, get into the vehicle. Then, you wi…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos