Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Megane 2 fuel filter

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Diesel fuel filter

We want to replace the diesel filter of the Renault Megane 2. We see the disassembly of all the pieces. We disassemble the right front wheel, remove the stone guard cover and locate the diesel filter. We disconnect all the oil circulation pipes and the electrical operating terminals. We unhook the filter from its housing: we remove the filter from inside the wheel compartment. We mount the filter in the specific housing and screw the clamping screws (we connect pipes and cables). We mount the stone guard with attached screws and finally we fix the wheel on the support motto: screw the clamping screws to the wheel.

Posted on 15 July 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacement of All Air Filters
Replacement of All Air Filters
Renault Megane (1995-2003 / Megane 1) In this video, you will replace all the air filters of a Renault Megane. The first to be replaced is the engine filter: remove and take out the four …
How to remove the fuel pump of a Renault Megane
How to remove the fuel pump of a Renault Megane
Renault Megane (2002-2010 / Megane 2) Before we can start, we will have to go and open the rear doors of our Renault Megane. So let's start by disassembling the rear seat bench, simply by…
How to Replace the Cabin Filter on a Renault Megane
How to Replace the Cabin Filter on a Renault Megane
Renault Megane (2008-2015 / Megane 3, Megane III) To replace the cabin filter on your Renault Megane, first remove the side cover of the dashboard near the door and unscrew the screw holding the filt…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos