Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Handle and Lock on the Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door lock

See other generations:
Video tutorial

In this video tutorial, you will find instructions to remove and replace the door handle along with the lock on the fourth generation Renault Clio. First, open the front driver's door and start by removing the plastic cap found on the side; then use a T20 Torx screwdriver to unscrew the screw located inside, as shown in the video.

At this point, you can remove the external handle along with the lock by moving it to the right to detach it; apply the reverse procedure for reassembly!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this guide, we will discover how to remove and replace the external door handle along with the driver’s side lock on a Renault Clio third series. …
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To remove the external handle from the Renault Clio, open the door to detach the circular protective cover on the side: beneath this cover, you will …
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, you will see the steps to remove the external door handle from the rear door of the fourth series Renault Clio. First, open the rear d…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos