Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gearbox bush on the Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Bushings

To replace the gearbox bush on the Renault Clio, lift the car with a jack or use a ramp to access the components underneath. You will need to remove the connecting rod located in the position shown in the video by loosening the two nuts at its end. Once the piece is removed, take out the old bushes from their housings by pushing them out with a hammer. Once the old bushes are removed, insert the new ones into their housings and reassemble the previously removed piece with the appropriate bolts.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gearbox Oil on a Renault Clio
How to Change the Gearbox Oil on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To change the gearbox oil on a Renault Clio, raise the car to gain easier access to the components underneath the engine compartment. Locate the gear…
How to Remove the Gear Knob of a Renault Clio
How to Remove the Gear Knob of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you begin, sit in the driver's seat of your Renault Clio. Start by prising off and lifting the lower section of the gear lever gaiter. Next, g…
How to Replace the Gear Oil on a Renault Clio 3?
How to Replace the Gear Oil on a Renault Clio 3?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the gear oil on a Renault Clio, lift the car using a ramp or jack to remove the plastic cover of the lower components by loosening the app…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos