Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Number Plate Light Replacement

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: License plate light

Replacing the number plate light takes just a few minutes. First, remove the number plate by unscrewing the screws that hold it in place with a screwdriver. After removing the number plate, disconnect the light units from the bumper. Next, take the bulb holder, where the wires are connected, and turn it counterclockwise to extract the bulb from the light unit. Once the bulb is removed from its holder, simply pull it out and fit the new bulb. Test the light to ensure it works correctly, and if so, reassemble everything.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Number Plate Light
Instructions for Replacing the Number Plate Light
Renault Clio (1998-2005 / Clio 2, MK 2) The number plate light is located right in the centre of the bumper and replacing it is really very simple; however, due to its position, it is not n…
How to replace the Renault Clio license plate
How to replace the Renault Clio license plate
Renault Clio (1998-2005 / Clio 2, MK 2) In this short and simple guide, let's see the instructions that will allow us to remove and replace the license plate of the Renault Clio, but also o…
Renault Clio 3 license plate light replacement
Renault Clio 3 license plate light replacement
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) Let's see how to replace the license plate lights of a Renault Clio third series, following these simple instructions. First we are going to remove t…

How to Remove the Rear Bumper of an Opel Corsa

How to remove the rear bumper of an Opel Corsa? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwdriver or battery-powered drill to unscrew the securing screws located near the rear lights, then remove them from the body along with their connectors. Unscrew the screws located at the top of the bumper, then unscrew the screws on the sides of the wheel arch liners and at the bottom of the bumper. Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the body (disconnect any power cables if necessary).

Watch the video!


by ScegliAuto

More videos