Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Service warning light

The procedure required to reset the oil change warning light on your Renault Megane Mk2 correctly and in total autonomy is quite simple and takes only a few seconds to complete. You won't need any diagnostic tools and just use the car's controls. First insert the key and turn on the ignition without starting the engine as well. Then scroll through the menu with the button located at the end of the right wiper lever and find the item relating to the remaining life of the oil. At this point, hold down the same button for a few seconds and you are done.

Posted on 28 February 2022 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2015-2023 / Megane IV, Megane 4) The service light, related to the car service, on a Renault Megane mk4 model vehicle activates when it is necessary to perform operations that includ…
Renault Megane (2002-2010 / Megane 2) To reset the Service light of the Renault Megane, you need to turn on the instrument panel by inserting the appropriate key into the corresponding ig…
Renault Megane (2002-2010 / Megane 2) To reset the Service light of the Renault Megane, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot:…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - How to reset the Renault Megane III service light? Read answer
    • Megane 2008-2015 - How do you reset the Renault Megane Service warning light? Read answer
    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos