Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset maintenance warning light on the Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part: Warning light – error code

In order to reset the service warning light on the vehicle, the following procedure must be followed: turn on the ignition by turning the key (do not start the engine). On the right side under the steering wheel, locate the multifunction control lever at the end of which there are two buttons, one with the arrow "up" and one with the arrow "down". Click on one of the two commands until "review autonomy" appears on the display. At this point, press and hold down the key with the "up" arrow for at least 5 seconds until the indication with the remaining service time appears. Press the above button again for another 5 seconds, until the flashing indication of the updated service interval appears.

Posted on 7 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Captur?
How to reset the service light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) After performing the routine maintenance required by the Renault Captur, it is necessary to reset the service or maintenance warning light. To reset …
Maintenance warning lights on Renault Captur
Maintenance warning lights on Renault Captur
Renault Captur (2013-2019 / MK 1) Let's see how to reset the maintenance warning light on a Renault Captur. We enter the cockpit of the Captur and turn on the instrument panel with th…
On-board computer reset on Renault Captur
On-board computer reset on Renault Captur
Renault Captur (2013-2019 / MK 1) What to do if a warning light appears on the Renault Captur instrument cluster? Let's see how to reset the spy on Captur. We turn on the instrument p…

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2019-2026 - On my Renault Captur the "Anti-pollution Check" warning light comes on, what could it be? Read answer

How to Change the Glow Plugs on a Hyundai Santa Fe

In this video, see how to remove and replace the glow plugs on your Hyundai Santa Fe. Pull the lever to open the engine compartment located at the bottom left of the dashboard, lift the bonnet, and secure it. Follow the video for the tools to use for disassembly. Remove the plastic engine cover and the air filter kit; you will see the engine head bare without plastics. Unscrew the coils using a socket wrench and disconnect the power cables. Once all the coils are removed, unscrew the glow plugs from the head and take them out. To remove the other coils and glow plugs, you need to uncover the metal protection from the head; unscrew these as well and prepare to install the new glow plugs. Be careful not to let any debris fall into the engine head while unscrewing the glow plugs. It is advisable to vacuum the glow plug wells before disassembly.

Watch the video!


by ScegliAuto

More videos