Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the key fob of a Renault Captur.

Model: Renault Captur MK 2 - Years 2019-2026
Part: Key

To replace the battery in the key fob of a Renault Captur car, you will only need a small flathead screwdriver and a new battery of the correct model. Take the key fob of your car and open the casing by sliding the top shell upwards; you can do this by applying pressure with your fingers. Once you have opened the casing, you will have access to the battery compartment; use the tip of a small screwdriver to pry at the edges of the battery so that you can remove it. Finally, replace the old battery by inserting the new one and close the key fob.

Posted on 29 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery of the Renault Captur
How to Replace the Key Fob Battery of the Renault Captur
Renault Captur (2013-2019 / MK 1) In this guide, we will see the steps that will allow you to remove and replace the battery of the key fob for the Renault Captur, as well as the Clio…
How to Replace the Key Fob Battery on the Renault Captur?
How to Replace the Key Fob Battery on the Renault Captur?
Renault Captur (2019-2026 / MK 2) If the battery of the Renault Captur key fob runs out and you need to replace it, you can follow this video tutorial that shows you how to do it. You…
How to Replace the Battery in a Renault Captur Key
How to Replace the Battery in a Renault Captur Key
Renault Captur (2013-2019 / MK 1) Replacing the battery (model CR 2032) in the key (commonly known as the fob) of the Renault Captur (the procedure is the same for the Clio IV series)…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos