Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery on a Renault Captur?

Model: Renault Captur MK 2 - Years 2019-2026
Part: Key

Good morning, today’s goal is to replace the key battery on our Renault Captur. Start by sliding the back cover of the key downwards. Then, remove the cover itself. This will expose the flat battery of the key. Proceed to extract the battery from its housing, and you will have successfully completed the disassembly. To fit the new battery and close the key, simply follow these steps in reverse, and you will have correctly completed the battery replacement for your Renault Captur key.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Renault Captur remote control
How to replace the battery of the Renault Captur remote control
Renault Captur (2013-2019 / MK 1) In this article we will see how to replace the battery of the remote/key of the Renault Captur. The procedure is simple, does not require tools and t…
How to replace the battery of the Renault Captur key
How to replace the battery of the Renault Captur key
Renault Captur (2013-2019 / MK 1) When the key of your first series Renault Captur suddenly stops working, it is very likely that the battery inside it has completely discharged. In t…
How to Replace the Key Fob Battery of the Renault Captur
How to Replace the Key Fob Battery of the Renault Captur
Renault Captur (2013-2019 / MK 1) In this guide, we will see the steps that will allow you to remove and replace the battery of the key fob for the Renault Captur, as well as the Clio…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos