Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Captur Keycard

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

Here’s how to change the battery in a keycard (i.e., remote) for a Renault Captur. You will need a replacement CR2032 battery, which can be easily found at any supermarket or electronics store.

On the keycard, locate the opening slot; gently insert a flat screwdriver, open the battery compartment, and remove the old battery, taking care of the polarity. Clean the metal contacts and insert the new battery in the same position.

Close the cover until you hear a click and check the functionality. Keep in mind that the average lifespan of a battery is about two years.


Posted on 22 March 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on Renault Captur
Resetting the Service Light on Renault Captur
Renault Captur (2013-2019 / MK 1) To reset the service light on Renault cars, you need to turn on the ignition but not the engine; otherwise, the required message will not appear. To …
How to Change the Remote Battery in the Renault Captur
How to Change the Remote Battery in the Renault Captur
Renault Captur (2013-2019 / MK 1) To change the battery in the Renault Captur remote, remove the key by pressing the button on the side and extracting the key. Using a flathead screwd…
How to Change the Remote Battery for the Renault Captur
How to Change the Remote Battery for the Renault Captur
Renault Captur (2013-2019 / MK 1) In this article, with the help of the video, you will see how to replace the remote and key battery for the Renault Captur. The procedure requires no…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos