Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Renault Captur?

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
This video is currently unavailable

In this tutorial, you will see how to replace the remote battery of the Renault Captur, which is also applicable to various other models from the French manufacturer. For this operation, you will only need a replacement battery of type CR2032. First, extract the emergency metal key by pressing the button located along the left edge, then use the tip of the key itself or a small screwdriver to lever in the indicated slot and unlock the cover.

Once done, remove the flat battery and insert the replacement, ensuring the correct polarity.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Renault Captur
How to Replace the Key Fob Battery of the Renault Captur
Renault Captur (2013-2019 / MK 1) In this guide, we will see the steps that will allow you to remove and replace the battery of the key fob for the Renault Captur, as well as the Clio…
How to change the battery of the key remote control for a Renault Captur.
Renault Captur (2019-2026 / MK 2) Replacing the battery of the key remote of a Renault Captur car is quite simple. Take the vehicle remote and apply pressure by sliding the part of th…
How to Change the Remote Battery in the Renault Captur
How to Change the Remote Battery in the Renault Captur
Renault Captur (2013-2019 / MK 1) To change the battery in the Renault Captur remote, remove the key by pressing the button on the side and extracting the key. Using a flathead screwd…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos