Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the key remote control for a Renault Captur.

Model: Renault Captur MK 2 - Years 2019-2026
Part: Key

Replacing the battery of the key remote of a Renault Captur car is quite simple. Take the vehicle remote and apply pressure by sliding the part of the shell from the side where the Renault logo is located, in this way you will open the remote. Inside you will find the battery compartment and the metal key; detach the key and use its tip to remove the battery cover and then remove it. Proceed to replace the battery, insert the cover, reposition the key in its place, and close the remote.

Posted on 25 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to change the battery of the Renault Captur remote control
How to change the battery of the Renault Captur remote control
Renault Captur (2013-2019 / MK 1) In this article, with the help of the video, we will see how to replace the battery of the remote control and key of the Renault Captur. The procedur…
How do you change the battery of the Renault Captur remote control?
How do you change the battery of the Renault Captur remote control?
Renault Captur (2013-2019 / MK 1) The key of any car is equipped with a remote control for remote opening and closing, undoubtedly very convenient. At some point, however, it may happ…
How to Change the Remote Battery in the Renault Captur
How to Change the Remote Battery in the Renault Captur
Renault Captur (2013-2019 / MK 1) To change the battery in the Renault Captur remote, remove the key by pressing the button on the side and extracting the key. Using a flathead screwd…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos