Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Wheel on a Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Wheel

See other generations:
Video tutorial

Let's see how to change a wheel on a Renault Captur: open the boot and take the wheel removal kit, which includes: jack, jack handle, screwdriver, wheel nut key (if available), telescopic key, and spare wheel. Position the jack under the jacking point of the vehicle (under the stiffest part of the chassis to avoid bending the metal due to excessive weight), lift the car slightly and loosen the four wheel nuts.

Now, raise the car with the jack handle, unscrew the nuts, and pull the wheel off the hub. Fit the new rim onto the hub with the respective nuts. Always remember to store the removal kit with all its parts back in the boot.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Replace the Wishbone on the Renault Captur?
How to Replace the Wishbone on the Renault Captur?
Renault Captur (2013-2019 / MK 1) To replace the wishbone on the Renault Captur, lift the car so that the wheel corresponding to the wishbone being replaced is not in contact with the…
How to replace the diesel filter on a Renault Captur?
How to replace the diesel filter on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To replace the diesel filter on a Renault Captur, lift the car to access the bolts securing the front right wheel, then completely remove the wheel. …
How to Replace the Diesel Filter on a Renault Captur?
How to Replace the Diesel Filter on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To replace the diesel filter on a Renault Captur, lift the vehicle to access the bolts securing the left rear wheel. Once the bolts are loosened, rem…

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2013-2019 - Where is the spare wheel of the Renault Captur? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos