Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wishbone on the Renault Captur?

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Control arm

See other generations:
Video tutorial

To replace the wishbone on the Renault Captur, lift the car so that the wheel corresponding to the wishbone being replaced is not in contact with the ground: this will allow you to unscrew the bolts securing the wheel, removing it and providing access to the components behind it. You can then unscrew the two bolts that secure the wishbone, connecting it to the driveshaft and the wheel hub; once the wishbone is removed, insert the new replacement part and fit the corresponding wheel.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Renault Captur
How to Replace the Wiper Blades on a Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the front and rear wiper blades of the Renault Captur, lift the arm and position it vertically. Press the central lever to slide the blade…
How do you replace the windshield wiper brush of the Renault Captur?
How do you replace the windshield wiper brush of the Renault Captur?
Renault Captur (2013-2019 / MK 1) The method for replacing the windshield wiper blade of the Renault Captur is not much different from the majority of cars on the road, in fact, this …
Wiper Blade Replacement on Renault Captur
Wiper Blade Replacement on Renault Captur
Renault Captur (2013-2019 / MK 1) Replace the wiper blades when they no longer clear water from the screen. Let's see how to do the replacement. Take the wiper blade to be replaced, p…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos