Do it yourself
Frequently asked questions about cars and motorcycles

How to connect an additional jack on the Renault Clio 3

Model: Renault Clio Clio 3, Clio III, MK 3 - Years 2005-2013
Part: Car stereo

If we want to add an additional jack type output on the car radio, for example to connect an ipod, it is necessary to proceed as follows: obtain the specific extraction keys for the car radio and use a cable with a jack and terminal output type connection. Remove the radio with the keys and locate the yellow connector on the back. Disconnect this last connector and take the green connector of the jack cable and fix them together by sliding them one over the other. At that point, reconnect the yellow / green connector now joined together and pass the other end of the cable inside the car radio housing, making it come out on the side of the glovebox. If we now scroll through the functions of the radio, we will notice that the "aux" output is now "on".

Posted on 11 April 2022 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) In order to reset the AdBlue warning light of the Renault Clio, you first need to top up the fluid by adding the necessary amount of additional liqui…
Renault Clio (2019-2026 / Clio V, Clio 5) To reset the AdBlue warning light on the Volkswagen Clio, you need to refill the additional liquid by adding the necessary amount into the correspond…
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) Here’s how to replace a wheel on a Renault Clio: open the boot and take the wheel removal kit, which includes: jack, jack handle, screwdriver, wheel …

    Frequently Asked Questions

    • Clio 2019-2026 - Why is the touch screen of the Renault Clio 5 not working? Read answer
    • Clio 2019-2026 - What to do if "system blocked" appears on the car radio, contact a dealer on the Renault Clio? Read answer

How to Remove the Interior Light of a Mini

Remove the interior light of a Mini: use a screwdriver or plastic lever to pry between the cover and the light itself (avoid damaging the headlining), pull the cover out from the panel and disconnect the power connector after removing it. Replace the damaged bulb with a new one (same size and voltage). Refit the light into its housing (push it in with your hands until the metal clips are fully locked). Test the light's functionality before completely refitting the piece.

Watch the video!


by ScegliAuto

More videos