Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove central tunnel on a Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Central tunnel
Operation: How to remove central tunnel on a Mercedes C-Class

Let's see how to disassemble the central tunnel on a Mercedes C-Class. With a plastic lever we remove by leveraging the covering placed in the lower part of the central tunnel, we remove the leather gearshift gaiter (with relative plastic frame). After removing the covering: unscrew the fastening screws in the upper part of the central tunnel with a screwdriver. Once this is done, we go to pull the tunnel away, disconnect the power cables of the knob. Finally we insert the new piece in the central tunnel compartment, we reassemble all the components of the glove compartment as we have previously disassembled.


Posted on 31 October 2023 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos