Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Chain on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Timing belt

See other generations:
Video tutorial

Replacing the timing chain on a Toyota Yaris. Lift the front bonnet and remove the engine cover.

Remove the cover above the engine and disconnect all cables on the sides. Remove the plastic cover on the side of the engine.

Use a spanner to loosen the chain tensioner roller and pull it out of its seat. Use a socket to unscrew the tensioner securing bolt.

Tighten everything with the socket. Refit the engine covers and all chain covers.

Test the car's operation.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Guide to Replacing and Adjusting the Timing Chain of the Toyota Yaris
Guide to Replacing and Adjusting the Timing Chain of the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This guide provides useful information for replacing and subsequently adjusting the timing chain of the Toyota Yaris. The timing chain replacement is…
How to Replace the Timing Chain on the Toyota Yaris?
How to Replace the Timing Chain on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the timing chain on the Toyota Yaris, you need to extract the engine from its housing to access the left side where the chain is located. …
How to Replace the Timing Chain on the Toyota Yaris
How to Replace the Timing Chain on the Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) You can replace the timing chain on the Toyota Yaris by accessing the side of the engine, removing the front right wheel and the corresponding inner …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos