Do it yourself
| ||||
|
Renault Clio - Video tutorial
Model: Renault Clio
Clio 2, MK 2
- Years 1998-2005 Let's see how to remove the headlight of a Renault Clio. We open the bonnet by pulling the bonnet opening lever and put it in safety; with a cordless screwdriver or screwdriver we unscrew the locking pins located in the upper part of the bumper. Once you have unscrewed the screws in the upper part, unscrew the pins of the stone guards and finally remove the pins located in the lower part of the bumper. We remove the bumper from the car body by hand. At this point we detach the headlights from the car body (unscrew the locking pins) and the lamp holders from the headlight. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. Finally we reassemble the front bumper and tighten the pins.
Posted on 31 October 2023 by ScegliAuto
Removal of headlight lights on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the burned out bulbs of the Clio headlight, let's see the disassembly on the front headlight. We open the front hood by pulling the lever l
How to replace the headlight bulb on Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The replacement of the headlight bulb of the Renault Clio 4 is carried out by opening the hood so that you can access the rear part of the headlight
How do you replace the front headlight bulb of the Renault Clio 2?
Renault Clio (1998-2005 / Clio 2, MK 2) In order to replace the headlight bulb of the Renault Clio, you need to open the hood so that you can access the internal part of the headlight assem Other guides that may interest you
|
Frequently Asked QuestionsFiat Ducato 2.8 JTD gearbox oil replacementLet's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |