Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuses on the Renault Megane 1.5 dCi

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Fuse box

Open the bonnet and remove the two plastic clips with a flat screwdriver to take off the plastic under the fuse box. Now, using a power tool, remove the central screw of the fuse box, then use a flat tool to pry the upper cover off. On the inside of this cover, you will find a sticker with the locations and amperage of the individual fuses that control the various functions of the car. To proceed with the replacement, simply remove the large connector covering the slots. Remember to always use pliers to remove and insert the fuses.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What is the Fuse Diagram for the Renault Megane 2 1.5 dci?
What is the Fuse Diagram for the Renault Megane 2 1.5 dci?
Renault Megane (2002-2010 / Megane 2) The fuse diagram is simply a graphical representation of the position of the fuses within the fuse box. To start, the Renault Megane 2 1.5 dci has no…
Replacing the Injectors on the Renault Megane 1.5 DCI
Replacing the Injectors on the Renault Megane 1.5 DCI
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, we will go through the main instructions to remove and replace the diesel injectors on the Renault Megane 1.5 DCI. First, open the bon…
Replacing the Timing Belt on the Renault Megane 1.5 dCi
Replacing the Timing Belt on the Renault Megane 1.5 dCi
Renault Megane (2002-2010 / Megane 2) In this guide, we will discover how to dismantle and replace the timing belt and water pump on the Renault Megane 1.5 dCi. First, lift the vehicle an…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the Renault Megane air conditioning fuse located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos