Do it yourself
Frequently asked questions about cars and motorcycles

How to Find and Replace Fuses in the Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

Now let's look at the fuse diagram and where they are located: at the bottom left of the steering wheel, there is a small cover; grasp it in the designated slot and pull it out; on the panel just removed or in the user manual, you will find the position, the device it controls, and the corresponding amperage of each fuse; where the fuses are located, you will also find small pliers to use if you need to replace a fuse.

To replace a fuse, take the small pliers, grasp the fuse to be changed, and pull it out; if the fuse needs replacing, you will notice the bridge inside the fuse is broken, whereas if the bridge inside the fuse is intact, the fuse is not blown.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Any fuse box in the Renault Clio contains the fuses that control the operation of the devices present in the vehicle: in this type of vehicle, you wi…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To manage the operation of the devices mounted on the Renault Clio, there will be appropriate fuses divided into the corresponding boxes: in this typ…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The fuses on a Renault Clio 4 are all contained within the single fuse box installed in the vehicle. In this model, you can find the fuse box at the …

    Frequently Asked Questions

    • Clio 2012-2019 - What is the location of the wiper fuse on the Renault Clio? Read answer
    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos