Do it yourself
Frequently asked questions about cars and motorcycles

Where Are the Fuses Located in the Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuse box

See other generations:
Video tutorial

Any fuse box in the Renault Clio contains the fuses that control the operation of the devices present in the vehicle: in this type of vehicle, you will find two boxes. The first is positioned in the dashboard just below the steering column: here you will find the fuses for the horn, the radio, the instrument cluster, etc. The second box is located on the right side of the engine bay: in it, you will find the fuses that control the operation of the front headlights, the fuel pump, the ECU, etc.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) All fuses in the Renault Clio 4 are located inside the designated fuse boxes. This model has two boxes: the first is located in the lower left part o…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The fuses on a Renault Clio 3 are located in two fuse boxes installed within the vehicle. This model has two boxes for housing the fuses. The first i…
Renault Clio (2019-2026 / Clio V, Clio 5) The fuses for the Renault Clio 5 are located inside designated fuse boxes within the vehicle. The first is situated in the engine compartment: to acc…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What is the location of the wiper fuse on the Renault Clio? Read answer
    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos