Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuse Box Located on a Renault Twingo?

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

If you need to check the operation of one or more fuses in your car but do not know where the fuse box is located, do not worry as finding it takes just a few seconds. Before discovering its location, ensure that the car is completely off and that you have disconnected the battery to eliminate any potential hazards.

Go to the driver's side and locate the small compartment to the left of the steering wheel. Open it and remove the cover.

Just below is the fuse box you were looking for, and you can carry out various maintenance and replacement operations.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Renault Twingo Z.E.?
Where are the fuses located in the Renault Twingo Z.E.?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) All the fuses of the Renault Twingo Z.E. are located inside the single fuse box installed in the vehicle: in this type of vehicle, the box is found w…
Location and Diagram of the Fuse Box on Renault Twingo
Location and Diagram of the Fuse Box on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The fuse box for the cabin is located inside the glove compartment on the Renault Twingo. Here you will find, for example, the fuse that controls the…
Where are the fuses located in the Renault Twingo?
Where are the fuses located in the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) Each of the fuse boxes of the Renault Twingo is responsible for containing the fuses that regulate the operation of the devices installed on the car:…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos