Do it yourself
Frequently asked questions about cars and motorcycles

Where is the fuse box located in the Renault Clio?

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Fuse box

See other generations:
Video tutorial

The fuse box is often positioned in an easily accessible location, yet well hidden within the vehicle. This is for safety reasons, as it is the car's electrical centre, so intervention should only be targeted and done by someone who knows what they are doing.

Additionally, it is advisable to disconnect the battery before carrying out any work. The fuse box in the Renault Clio is situated on the driver's side, exactly at the far left of the dashboard, just below a small plastic cover.

Once this cover is removed, you will have free access to the box.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

Renault Clio (1998-2005 / MK 2, Clio 2) The window regulator fuse of our second series Renault Clio is located inside the fuse box. The fuse box is situated in the engine compartment, in th…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The Renault Clio has two fuse boxes located inside it. The first fuse box is found within the cabin, specifically behind the lower left dashboard pan…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The attached video shows the complete fuse diagram for our Renault Clio. The fuses protect the electrical components of our van from short circuits a…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What is the location of the wiper fuse on the Renault Clio? Read answer
    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos