Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulb in the Renault Megan 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

See other generations:
Video tutorial

In the following video, you will see how to replace the rear lights on the Renault Megan 3, specifically the brake light bulb. The procedure for removing the bulbs from the rear light is the same for any bulb in that area.

Before starting, ensure the car is turned off and the handbrake is engaged. To replace the rear light bulbs, open the boot and remove the cover to access the screws for dismantling the light, as shown in the video.

Once this step is completed, you can remove the light from the outside of the vehicle by applying slight pressure with a screwdriver. At this point, disconnect the power connector, using a flat screwdriver for assistance, and remove the bulb holder plate.

Now, simply unscrew the bulb to be replaced by turning it a quarter turn. Similarly, proceed with replacing it with the new bulb.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Megane
How to Reset the Service Light on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this video tutorial, learn how to reset the service light on a 2016 Renault Megane. First, insert the electronic key and turn on the instrument cl…
How to Replace the Number Plate Light of the Renault Megane II
How to Replace the Number Plate Light of the Renault Megane II
Renault Megane (2002-2010 / Megane 2) To replace the number plate light of the Renault Megane II, follow these steps: - Open the boot of the vehicle; - Insert a flathead screwdriver into …
How to Activate and Deactivate the Start&Stop System on a Renault Megane
How to Activate and Deactivate the Start&Stop System on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this brief guide, we will see the instructions that will allow us to activate and deactivate the Start&Stop system of the Renault Megane. First, g…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos