Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Radiator in a Renault Koleos

Model: Renault Koleos MK 1 - Years 2008-2015
Part: Heater core

In this video, you will see how to dismantle and replace the heating radiator in the cabin of a Renault Koleos, following the instructions below. First, get inside the vehicle and remove the plastic panel found to the right of the pedal area; then remove the upper cover and buttons by unscrewing the screws and disconnecting the electrical connector. Next, disconnect the radiator fluid hose, allowing it to drain into a container; now unscrew the screws of the heating radiator to remove it completely.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin heating radiator of the Renault Koleos
Replacement of the cabin heating radiator of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) The main steps outlined in this guide will allow us to disassemble and replace the cabin heater radiator of the Renault Koleos. First, let's open the…
How to know the fuse diagram of a Renault Koleos
How to know the fuse diagram of a Renault Koleos
Renault Koleos (2016-2024 / MK 2) In this video tutorial, we are shown the fuse diagrams present in a Renault Koleos car. The first fuse panels are located inside the vehicle's cabin,…
How to disassemble the rear bumper of the Renault Koleos
How to disassemble the rear bumper of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Removing the rear bumper of your first-generation Renault Koleos may seem like a very complex operation and not feasible without the help of a profes…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos