Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the radiator of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Radiator

See other generations:
Video tutorial

To replace the radiator of the Renault Twingo, we need to open the front hood and loosen the screws located on the top of the bumper; by loosening the screws, we can start to remove part of the bumper, unscrew the lower screws and remove the bumper from its seat.

Unscrew the fixing brackets of the top of the radiator, namely the tank.

It is also necessary to remove the water pump and drain the water from the radiator by removing the nut on the tank. Unscrew the screws that secure the radiator and disconnect the connector.

Remove the radiator and install the new piece. The steps to assemble the previously removed parts are the same but done in reverse.


Posted on 22 January 2025 by ScegliAuto


Related tutorials

Replacement of the cabin fan resistor of the Renault Twingo
Replacement of the cabin fan resistor of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) In this guide we will see the information related to disassembly and replacement of the cabin fan resistor of the Renault Twingo. First, we get on bo…
How to Replace the Battery in a Renault Twingo
How to Replace the Battery in a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To replace the battery in a Renault Twingo, open the bonnet to access the components in the engine bay. On the left side, locate the battery, connect…
How to Replace the Air Filter on a Renault Twingo 1
How to Replace the Air Filter on a Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) If you want to replace the air filter on your Renault Twingo Mk1 yourself but don't know how, don't worry because this guide will provide all the ins…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos