Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump in a Renault Twingo?

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Pump

In this tutorial, you will learn how to replace the windscreen washer pump in a Renault Twingo, a very simple and quick operation. First, ensure the key is not inserted. Then, lift the front right side of the vehicle and remove both the wheel and the inner arch cover by unscrewing the relevant bolts. Next, locate the pump, pull it out of the reservoir, and disconnect both hoses and the power connector. Finally, connect the new part and reassemble everything by following the reverse procedure.

Posted on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Wiper Motor on Renault Twingo 1
Replacing the Wiper Motor on Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) In today's tutorial video, you will learn how to remove and replace the wiper motor on a first-generation Renault Twingo, following the instructions …
Fuse Box Diagram for the Renault Twingo
Fuse Box Diagram for the Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) This model from the French manufacturer has two fuse boxes. The first is located in the cabin on the lower left side of the steering column, near the…
How to Replace the Float in a Renault Twingo?
How to Replace the Float in a Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) If you need to replace the float in a Renault Twingo, you will need to disassemble the pump. This tutorial explains how to proceed. First, remove the…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos