Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Wiper Motor on Renault Twingo 1

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Power window motor

In today's tutorial video, you will learn how to remove and replace the wiper motor on a first-generation Renault Twingo, following the instructions below. First, open the bonnet of your car and start by removing the wiper arm by pulling it upwards with force; then unscrew all the fixing screws of the wiper motor brackets, disconnecting the electrical connector of the motor itself: now you can remove it and replace it with the new one, reassembling everything and finally checking its operation!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Starter Motor on the Renault Twingo
How to Dismantle the Starter Motor on the Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Here are the instructions to dismantle and replace the starter motor on the Renault Twingo. First, open the bonnet and start by removing the air filt…
How to Replace the Front Wipers on the Renault Twingo 1
How to Replace the Front Wipers on the Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) In this video, see how to remove and replace the front wipers on a first-series Renault Twingo in simple and quick steps. First, lift the wiper arm t…
How do you replace the starter motor of the Renault Twingo?
How do you replace the starter motor of the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In order to replace the starter motor of the Renault Twingo, you need to open the hood so that you can access the components located inside the engin…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos