Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wiper Blades on a Renault Twingo 2

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Windshield wipers

Replacing the front and rear wiper blades is a very simple task, and the steps are similar for many vehicles, including Renaults. Today, you will learn how to replace the blades on a Renault Twingo 2. The first step is to lift the wiper arm and press the clip of the blade, sliding it outwards to remove it. After doing the same with the second front wiper, proceed to fit the new blades. Insert the blades into the designated slot and push inwards; when you hear the clip, it means the blade is securely fixed. Repeat the same operation for the rear blade.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the wipers of the Renault Twingo 2
How to replace the wipers of the Renault Twingo 2
Renault Twingo (2007-2014 / Twingo 2) In this new guide of ours, we will discover the various steps you need to take if you intend to replace the windshield wipers of your second edition …
How to Replace the Wiper Blades on the Renault Twingo II
How to Replace the Wiper Blades on the Renault Twingo II
Renault Twingo (2007-2014 / Twingo 2) Learn how to change the wiper blades on the Renault Twingo II: simply press the button located on the front of the wiper to release the blade from it…
How to replace the windshield wiper blade of the Renault Twingo
How to replace the windshield wiper blade of the Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) The windshield wipers of a car, in our example a Renault Twingo, should be replaced once a year, as worn out wipers will not properly remove raindrop…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos