Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump on a Renault Laguna

Model: Renault Laguna MK 2, Laguna 2, X74 - Years 2001-2007
Part: Pump

Today, you will see the instructions to remove and replace the windscreen washer pump on a Renault Laguna. First, move to the right side of the vehicle and start by removing the front wheel arch liner to access the washer fluid reservoir; you will find the washer pump fixed to it, disconnecting the various hoses to remove it, as shown in the video. At this point, install the new washer pump, as well as the original; make the various connections and secure it to the fluid reservoir. Finally, top up the fluid and test its operation!

Posted on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Timing Belt on a Renault Laguna
How to Change the Timing Belt on a Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this video, see how to remove and change the timing belt and water pump on a Renault Laguna. Lift the car on a column lift and remove the undertra…
How to Replace the Timing Belt on Renault Laguna
How to Replace the Timing Belt on Renault Laguna
Renault Laguna (1994-2001 / MK 1, Laguna 1, X56) To replace the timing belt on a Renault Laguna: lift the car on a column lift or jack (if necessary, remove the front wheel and the right wheel arch …
Fuse Diagram for the Renault Laguna 1
Fuse Diagram for the Renault Laguna 1
Renault Laguna (1994-2001 / MK 1, Laguna 1, X56) Production of the Renault Laguna 1 ceased nearly 30 years ago, in 2001, but that doesn't mean there isn't someone who still has one in their garage! …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos