Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Timing Belt on a Renault Laguna

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Timing belt

See other generations:
Video tutorial

In this video, see how to remove and change the timing belt and water pump on a Renault Laguna. Lift the car on a column lift and remove the undertray located underneath the vehicle.

Then, disconnect the hose connected to the radiator using pliers. Remove the right wheel arch liner with a screwdriver; use a spanner to loosen the tensioner pulley and slide the belt off its seat.

Use a socket wrench to unscrew the tensioner pulley securing bolt, and remove the water pump as shown in the video. Install the new water pump, the tensioner, and the belt, tightening everything with the socket wrench.

Reattach the securing bolts of the wheel arch liner and reinstall the wheel on the vehicle.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to replace the timing belt of the Renault Laguna
How to replace the timing belt of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) The timing belt on a Renault Laguna vehicle must be replaced between 60,000 and 120,000 km. To replace the belt, we need to open the front hood of th…
How to Replace the Timing Belt on Renault Laguna
How to Replace the Timing Belt on Renault Laguna
Renault Laguna (1994-2001 / MK 1, Laguna 1, X56) To replace the timing belt on a Renault Laguna: lift the car on a column lift or jack (if necessary, remove the front wheel and the right wheel arch …
How to change the language on the Renault Laguna
How to change the language on the Renault Laguna
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) Today we will discover the instructions that will allow us to change the language on the on-board computer of the Renault Laguna. First of all, we ge…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos