Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Renault Laguna

Model: Renault Laguna MK 2, Laguna 2, X74 - Years 2001-2007
Part: Timing belt

The timing belt on a Renault Laguna vehicle must be replaced between 60,000 and 120,000 km. To replace the belt, we need to open the front hood of the car and remove the engine cover. We lift the vehicle on a scaffold to access the belt more easily. We loosen the tensioner pulley nut to remove the worn timing belt. We lubricate the new timing belt with WD 40 oil and insert it into the pulley. We tighten the tensioner pulley nut and lower the vehicle to the ground.

Posted on 5 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Timing Belt on a Renault Laguna
How to Change the Timing Belt on a Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this video, see how to remove and change the timing belt and water pump on a Renault Laguna. Lift the car on a column lift and remove the undertra…
How to Replace the Timing Belt on Renault Laguna
How to Replace the Timing Belt on Renault Laguna
Renault Laguna (1994-2001 / MK 1, Laguna 1, X56) To replace the timing belt on a Renault Laguna: lift the car on a column lift or jack (if necessary, remove the front wheel and the right wheel arch …
Replacing the Camshaft Oil Seal
Replacing the Camshaft Oil Seal
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) Remove the timing belt cover and secure the pulley to prevent it from rotating accidentally. Take off the timing belt and remove the pulley. Replace …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos