Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Float in a Renault Twingo?

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Fuel pump

If you need to replace the float in a Renault Twingo, you will need to disassemble the pump. This tutorial explains how to proceed. First, remove the rear seat by unscrewing the relevant bolts, then lift the carpet and remove the rubber cap from the pump. Next, disconnect both the connector and the pipe, and unscrew the large outer ring, using a suitable extractor or applying force with a large screwdriver and a hammer. Once this is done, you can extract the pump, remove the float, and install the replacement.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (2014-2024 / Twingo 3, Twingo III) As we can see in this tutorial, replacing the cabin filter in the Renault Twingo is an extremely simple and quick operation. First, position yourself…
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial, you will see how to replace the front headlight bulbs in a Renault Twingo, a very simple and quick operation. First, ensure that th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos