Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Koleos
    4. : How to replace the front brake pads on Renault Koleos - Samsung QM5

Renault Koleos - Video tutorial

Model: Renault Koleos MK 1 - Years 2008-2015
Part: Brake pads
Operation: How to replace the front brake pads on Renault Koleos - Samsung QM5

Let's see below the main steps to remove and replace the front brake pads, but it also applies to the rear ones, of the Renault Koleos, but also of the Samsung QM5. First of all we lift the car and remove the wheel; after which we unscrew the fixing screws of the front brake caliper, in order to remove it from the disc, pressing inside to make the piston return. At this point we remove the old brake pads and replace them with new ones, of excellent quality; insert them in the correct direction and reassemble the brake caliper, following the video to the end!


Posted on 4 June 2024 by ScegliAuto



How to disassemble the front door panel of the Renault Koleos - Samsung QM5.
Renault Koleos (2016-2024 / MK 2) .. door panel of the Renault Koleos and also the Samsung QM5 in this guide. First, we open the front door and start removing the various covers and plastic..
How to disassemble the car stereo of the Renault Koleos - Samsung QM5
Renault Koleos (2008-2015 / MK 1) .. car radio of the Renault Koleos (but also of the Samsung QM5). First of all we get on board the car and begin to remove the two plastic covers that we..
How to replace the EGR valve on the Renault Koleos 2.0 dCI - Samsung QM5
Renault Koleos (2008-2015 / MK 1) .. of the Renault Koleos 2.0 dCi, but also of the Samsung QM5. First of all we open the bonnet of our car and start removing the air intake sleeve, unscrewing..

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos