Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads of the Renault Koleos

Model: Renault Koleos MK 1 - Years 2008-2015
Part: Brake pads

Following the instructions in this guide, we will see how to disassemble and replace the rear brake pads of the Renault Koleos. First of all, lift the car and start disassembling and removing the rear wheel; then unscrew the fixing screws found on the back of the caliper, then lever inside the piston to remove it from the disc, as shown in the video. At this point, remove the old brake pads, install the new original ones; clean the caliper from the remaining dirt and reassemble the braking system!

Posted on 14 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Renault Koleos - Samsung QM5
How to Replace the Front Brake Pads on a Renault Koleos - Samsung QM5
Renault Koleos (2008-2015 / MK 1) Below are the main steps to remove and replace the front brake pads, which also applies to the rear ones, on a Renault Koleos and Samsung QM5. First,…
How to disassemble the rear bumper of the Renault Koleos
How to disassemble the rear bumper of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Removing the rear bumper of your first-generation Renault Koleos may seem like a very complex operation and not feasible without the help of a profes…
Replace the Rear Headlamp Bulbs on Renault Koleos
Replace the Rear Headlamp Bulbs on Renault Koleos
Renault Koleos (2016-2024 / MK 2) Want to replace the rear headlamp bulbs on your Renault Koleos but don't know how? Here's how to do it: open the boot and using a screwdriver, unscre…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos