Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Rear Headlamp Bulbs on Renault Koleos

Model: Renault Koleos MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light bulb

See other generations:
Video tutorial

Want to replace the rear headlamp bulbs on your Renault Koleos but don't know how? Here's how to do it: open the boot and using a screwdriver, unscrew (with a socket or screwdriver with insert) the securing nut located at the side of the rear headlamp; once the headlamp is free from any constraints (remove the plastic pin as shown in the video), disconnect it from the bodywork (unplug the relevant power connectors).

Replace the damaged bulbs with identical size and voltage pieces.

Finally, refit the headlamp and test the correct operation of the lights.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

Replacing the headlight bulbs of the Renault Koleos
Replacing the headlight bulbs of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Today, we will go through the steps to dismantle and replace the front headlight and its bulbs on the Renault Koleos. First, open the engine bonnet a…
How to Replace the Rear Light Bulb on a Renault Koleos?
How to Replace the Rear Light Bulb on a Renault Koleos?
Renault Koleos (2016-2024 / MK 2) To replace the rear light bulb on a Renault Koleos, open the tailgate to locate the internal trim panel corresponding to the light cluster. By removi…
How to Remove the Rear Bumper of the Renault Koleos
How to Remove the Rear Bumper of the Renault Koleos
Renault Koleos (2008-2015 / MK 1) Removing the rear bumper of your first-generation Renault Koleos may seem like a complex task that requires a professional's help. In reality, it is …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos