Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the headlight bulbs of the Renault Koleos

Model: Renault Koleos MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

Today, we will go through the steps to dismantle and replace the front headlight and its bulbs on the Renault Koleos. First, open the engine bonnet and start removing the front headlight.

To do this, you will need to remove the bumper by unscrewing all the fixing screws located on the wheel arches and the bumper itself, as shown in the video. Now, unscrew the screws of the headlight unit to remove it, disconnecting the electrical connector; then remove the dipped beam bulb and replace it with the new one, ensuring it has the same fitting, following the video tutorial to the end!


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb of the Renault Koleos?
How to Replace the Front Headlamp Bulb of the Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To replace the front headlamp bulb of the Renault Koleos, open the bonnet to access the internal components of the engine bay. Here, locate the inter…
How to Replace the Front Headlamp Bulb on a Renault Koleos?
How to Replace the Front Headlamp Bulb on a Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To replace the front headlamp bulb on a Renault Koleos, open the bonnet and access the rear of the corresponding headlamp. Here you will find the cir…
Replace the Rear Headlamp Bulbs on Renault Koleos
Replace the Rear Headlamp Bulbs on Renault Koleos
Renault Koleos (2016-2024 / MK 2) Want to replace the rear headlamp bulbs on your Renault Koleos but don't know how? Here's how to do it: open the boot and using a screwdriver, unscre…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos