Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Renault Koleos?

Model: Renault Koleos MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb on a Renault Koleos, open the tailgate to locate the internal trim panel corresponding to the light cluster. By removing this panel, you will access the screw that secures the light from the inside, which must be loosened to extract the light.

After removing the old light, disconnect its connectors and pull out the bulb inside. The new bulb can then be inserted into the light, which should be secured with the appropriate screw.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

Replace the Rear Headlamp Bulbs on Renault Koleos
Replace the Rear Headlamp Bulbs on Renault Koleos
Renault Koleos (2016-2024 / MK 2) Want to replace the rear headlamp bulbs on your Renault Koleos but don't know how? Here's how to do it: open the boot and using a screwdriver, unscre…
How to Replace the Front Headlamp Bulb on a Renault Koleos?
How to Replace the Front Headlamp Bulb on a Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To replace the front headlamp bulb on a Renault Koleos, open the bonnet and access the rear of the corresponding headlamp. Here you will find the cir…
How to Replace the Front Headlamp Bulb of the Renault Koleos?
How to Replace the Front Headlamp Bulb of the Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To replace the front headlamp bulb of the Renault Koleos, open the bonnet to access the internal components of the engine bay. Here, locate the inter…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos