Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve on the Renault Koleos 2.0 dCi - Samsung QM5

Model: Renault Koleos MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: EGR valve

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the EGR valve on the Renault Koleos 2.0 dCi, as well as the Samsung QM5. First, open the bonnet of your car and start removing the air intake hose by unscrewing the clamp screws; then, disconnect the exhaust gas manifold from the EGR valve by unscrewing the securing nuts, as shown in the video.

At this point, disconnect the electrical connector of the valve, remove it, and replace it with the new one (or simply clean it); then reassemble everything by following the reverse procedure!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Renault Koleos - Samsung QM5
How to Replace the Front Brake Pads on a Renault Koleos - Samsung QM5
Renault Koleos (2008-2015 / MK 1) .. applies to the rear ones, on a Renault Koleos and Samsung QM5. First, lift the vehicle and remove the wheel; then unscrew the fastening bolts of the front.. …
How to Remove the Radio from the Renault Koleos - Samsung QM5
How to Remove the Radio from the Renault Koleos - Samsung QM5
Renault Koleos (2008-2015 / MK 1) .. in the Renault Koleos (also applicable to the Samsung QM5). First, get inside the vehicle and start by removing the two plastic covers located on.. …
How to Remove the Front Door Panel of the Renault Koleos - Samsung QM5
How to Remove the Front Door Panel of the Renault Koleos - Samsung QM5
Renault Koleos (2016-2024 / MK 2) .. door panel of the Renault Koleos, as well as the Samsung QM5. First, open the front door and begin removing the various covers and plastic caps found.. …

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos