|
Do it yourself
| |||
| ||||
How to clean the EGR valve on a Renault Mégane MK3
Model: Renault Megane
Megane 3, Megane III
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Video tutorial
To clean the EGR valve on a Renault Mégane MK3, with the engine off, pull the handbrake, open the bonnet with the lever, and locate the EGR valve and its intake duct. The valve recirculates unused exhaust gases and gets dirty very quickly, so it needs regular cleaning. Use a thin flat screwdriver to insert it into the hollow space of the connector to remove it. The valve is held by three nuts: one is located behind the valve and is a bit difficult to reach. Use an 8 mm socket to loosen them and finish by hand. The valve may be stuck: wiggle it side to side to free it. Also, remove the intake duct of the EGR valve: to do this, remove the black frame of the engine cover, held by two screws at the base. For cleaning, spray both parts with oven cleaner, let it sit for 20 minutes, and repeat the process. Rinse with fuel after each spray. Use a brush to reach difficult areas. Once cleaned, reassemble: insert the duct into the two seats, screw the black frame back on, reattach the EGR valve ensuring the metal gasket is present, tighten the three nuts (first by hand, then with the spanner), and reconnect the electrical connector.
Posted on 6 October 2026 by ScegliAuto
Related tutorials
Renault Megane
(2008-2015 /
Megane 3, Megane III)
In this video, you can see how to clean the EGR valve of a Renault Megane III. Open the bonnet and remove the engine cover. The EGR valve and its int…
Renault Megane
(2002-2010 /
Megane 2)
Watch this video to learn how to clean an EGR valve on a Renault Megane without removing everything. Lift the bonnet and secure it, then use a screwd…
Renault Megane
(1995-2003 /
Megane 1)
This video shows where the EGR valve is located on the Renault Megane 1.9 dTi, useful if you need to remove it for replacement. As shown, the valve i…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Remove the Spare Wheel on a Citroen C4 Grand Picasso
Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |