Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cleaning an EGR Valve on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Checks and maintenance

Watch this video to learn how to clean an EGR valve on a Renault Megane without removing everything. Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the air intake pipe and remove it from the engine compartment. Start spraying cleaning fluid from the can into the air intake pipe (repeat this several times). Enhance the cleaning of the valve by using a suitable product to flow into the tank. Finally, reinstall the air intake pipe in the engine compartment after cleaning it of any dirt and deposits.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the EGR Valve of a Renault Megane III
How to Clean the EGR Valve of a Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you can see how to clean the EGR valve of a Renault Megane III. Open the bonnet and remove the engine cover. The EGR valve and its int…
How to Clean the EGR Valve in a Renault Megane 2
How to Clean the EGR Valve in a Renault Megane 2
Renault Megane (2002-2010 / Megane 2) In this video tutorial, see how to clean the EGR valve in a Renault Megane 2 by following a few simple steps: first, get inside the vehicle, turn off…
Where is the EGR valve located in the Renault Megane 1.0 dTi?
Where is the EGR valve located in the Renault Megane 1.0 dTi?
Renault Megane (1995-2003 / Megane 1) In this video we can see where the EGR valve is located in the Renault Megane 1.9 dTi, useful in case we need to disassemble it, for example to repla…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer
    • Megane 2008-2015 - What does the Renault Megane "Risk of engine failure" label mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos