Do it yourself
Frequently asked questions about cars and motorcycles

How to Clean the EGR Valve of a Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: EGR valve

In this video, you can see how to clean the EGR valve of a Renault Megane III. Open the bonnet and remove the engine cover. The EGR valve and its intake pipe are located at the centre. This valve recycles the gases that the engine has not burned and gets dirty very quickly. Disconnect the electrical connector, then remove the bolts securing the valve, which may sometimes be difficult to remove from its housing. You will also need to remove the intake pipe by taking off the engine support, held in place by two screws. This will not be easy to remove either. Cleaning the valve and the pipe is a lengthy and messy task that should be done in a suitable location, using a degreaser applied multiple times, followed by cleaning with petrol. Once clean, reassemble starting with the intake pipe, where the engine cover support will be refitted, then refit the EGR valve and reconnect the connector. Task complete.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (1995-2003 / Megane 1) In this video we can see where the EGR valve is located in the Renault Megane 1.9 dTi, useful in case we need to disassemble it, for example to repla…
Renault Megane (2008-2015 / Megane III, Megane 3) Today we will see what are the main problems of the 1.5 DCI engine, in this case located in the engine compartment of the Renault Megane (also valid …
Renault Megane (2002-2010 / Megane 2) Let's see how to replace the EGR valve on this Renault Megane II diesel: open the hood and remove the engine cover. The EGR valve is a cylindrical me…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2015-2023 - What problems with the anti-pollution system on the Renault Megane? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos