Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the EGR valve on a Renault Megane II diesel

Model: Renault Megane Megane 2 - Years 2002-2010
Part: EGR valve

Let's see how to replace the EGR valve on this Renault Megane II diesel: open the hood and remove the engine cover. The EGR valve is a cylindrical metal component connected to the intake manifold, with an electrical connector. Disconnect the connector with a flat screwdriver, unscrew the three fixing screws (one of which is a bit difficult) and remove the valve. Clean the intake duct; remove the engine cover support and unscrew the nuts that secure the duct to the EGR valve and the engine, manually remove the larger carbon deposits, then use a specific cleaner and gentle brushes. Do not use aggressive solvents, which could cause serious damage. We can find the new valve complete with gasket, for example on AliExpress with code 1005008346209439 at a price of 31.31 euros, free delivery in 5 days. Mount it by initially screwing the screws by hand, and only later tightening them. Reconnect the electrical connector, if we had removed the intake duct, reassemble it, and the engine cover support. And that's it.

Posted on 20 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (1995-2003 / Megane 1) In this video we can see where the EGR valve is located in the Renault Megane 1.9 dTi, useful in case we need to disassemble it, for example to repla…
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you can see how to clean the EGR valve of a Renault Megane III. Open the bonnet and remove the engine cover. The EGR valve and its int…
Renault Megane (2015-2023 / Megane 4, Megane IV) Before you can start, sit in the driver's seat of your Renault Megane 1.6 diesel. Connect your laptop to the car and launch the specific software. Ne…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2015-2023 - What problems with the anti-pollution system on the Renault Megane? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos