Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Koleos
    4. : How to disassemble the front door panel of the Renault Koleos - Samsung QM5.

Renault Koleos - Video tutorial

Model: Renault Koleos MK 2 - Years 2016-2024
Part: Door panel
Operation: How to disassemble the front door panel of the Renault Koleos - Samsung QM5.

Let's take a look at the instructions on how to disassemble and replace the front door panel of the Renault Koleos and also the Samsung QM5 in this guide. First, we open the front door and start removing the various covers and plastic caps we find on the door panel using a thin lever. Then, we unscrew the fixing screws found underneath using a torx screwdriver, as shown in the video. At this point, we pry on the sides of the panel to detach and remove it, disconnecting the electrical connector of the switch panel and the handle cable. Finally, we reassemble everything!


Posted on 14 May 2023 by ScegliAuto



How to disassemble the car stereo of the Renault Koleos - Samsung QM5
Renault Koleos (2008-2015 / MK 1) Let's see in this guide the instructions that will allow us to disassemble and replace the stock car radio of the Renault Koleos (but also of the Sam
How to replace the front brake pads on Renault Koleos - Samsung QM5
Renault Koleos (2008-2015 / MK 1) .. rear ones, of the Renault Koleos, but also of the Samsung QM5. First of all we lift the car and remove the wheel; after which we unscrew the fixing screws..
How to replace the EGR valve on the Renault Koleos 2.0 dCI - Samsung QM5
Renault Koleos (2008-2015 / MK 1) .. of the Renault Koleos 2.0 dCi, but also of the Samsung QM5. First of all we open the bonnet of our car and start removing the air intake sleeve, unscrewing..

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos