Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Renault Master 2020

Model: Renault Master MK 3 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

If you have serviced your Renault Master Mk2 (2020) and want to manually reset the warning light on the dashboard, carefully read the following guide and follow the steps described. First, insert the key, turn it to the first position, and start the dashboard.

Then, press the lower button located at the end of the right steering lever several times and find the "Service intervals" option on the mini display. At this point, hold down the same button and release it as soon as the reset is complete.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2020 Renault Master
How to Reset the Service Light on the 2020 Renault Master
Renault Master (2010-2023 / MK 3) Manually resetting the service light on the instrument cluster of your Renault Master Mk3 (2020) is very simple. Just follow these steps to complete …
How to Reset the Service Light on a Renault Master
How to Reset the Service Light on a Renault Master
Renault Master (2010-2023 / MK 3) To reset the service light on a Renault Master 2, follow these steps: Turn on the ignition without starting the engine. Press the reset button on the…
How to Reset the Service Light on a Renault Master
How to Reset the Service Light on a Renault Master
Renault Master (2010-2023 / MK 3) To reset the service light on a Renault Master vehicle, follow these steps: Start the car and ensure the display shows the total mileage. Press and h…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos