Do it yourself
Frequently asked questions about cars and motorcycles

How do you remove the dashboard of the Renault Laguna?

Model: Renault Laguna Laguna 2, MK 2, X74 - Years 2001-2007
Part: Dashboard

In order to disassemble the dashboard of the Renault Laguna, it is necessary to remove the chrome molding which is located along the entire dashboard, loosening the screws below. In this way it will be possible to remove the car radio by unscrewing the fixing screws and disconnecting the connectors at the rear. Subsequently, the climate control controls and the panel that surrounds the gear lever must also be removed; then it will be possible to unscrew the screws that secure the steering wheel, removing it completely together with all the other panels that surround the steering column and also those that surround the glovebox.

Posted on 20 September 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

Renault Laguna (2001-2007 / Laguna 2, MK 2, X74) In order to disassemble the dashboard of the Renault Laguna, you need to loosen the screws that hold the airbag in the center of the steering wheel s…
Renault Laguna (2007-2015 / MK III, Laguna 3, MK 3, Laguna III, X91) Replacing the diesel filter on a Renault Laguna? Let's see how it disassembles. We lift the car on a column bridge, remove the wheel, remove the prot…
Renault Laguna (2007-2015 / MK III, Laguna 3, MK 3, Laguna III, X91) In this short and simple guide we will understand how to disassemble and replace the original Renault Laguna car stereo, following the instructions b…

Other guides you may be interested in

Remove the Front Door Panel on Mercedes C

Remove the front door panel on Mercedes C to access the window switch assembly. Disconnect the battery terminals in the engine compartment. Use a screwdriver to remove the screws located in the upper lever opening area and the screws in the handle (after removing the plastic screw covers). Remove the trim near the lock, unscrew any remaining screws on the door panel, and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power harness and the opening cable). Unscrew or detach the retaining clips of the window switch assembly.

Watch the video!


by ScegliAuto

More videos