Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Renault Clio RS

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Air filter

See other generations:
Video tutorial

If you own the new Renault Clio RS and want to replace the engine air filter yourself, follow the steps outlined below. Before proceeding, ensure the car is completely off and the engine is cold.

Lift the front bonnet and locate the air filter box on the upper right side of the engine bay. Remove the cover of the box by hand and pull out the old filter. Finally, insert the new filter correctly and refit the protective cover.

Lower the bonnet and you're done.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…
How to replace the engine air filter of the Renault Clio 5
How to replace the engine air filter of the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) If it is time to replace the engine air filter of your Renault Clio fifth series, all you need to do is read the following guide carefully and follow…
Procedure to Replace the Air Filter in a Renault Clio IV 1.5 DCI
Procedure to Replace the Air Filter in a Renault Clio IV 1.5 DCI
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video tutorial, you will see how to replace the air filter in a Renault Clio IV 1.5 DCI by following a few simple steps: first, purchase a ne…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos