Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuses for the Cabin Fan in the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Blower motor

In case of sudden malfunction of the cabin fan in the Renault Clio 4, first check the status of the fuses related to the air conditioning system, whose positions are indicated in this video. As shown, they are all located in the box inside the cabin, in the lower left area of the dashboard on the driver's side, and are labelled F12, F30, and F35. If a fuse is blown, ensure to use a replacement with the same amperage and always operate with the vehicle turned off to avoid causing any damage.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Cabin Fan in the Renault Clio
Replacement of the Cabin Fan in the Renault Clio
Renault Clio (1990-1998 / Clio 1, MK 1) In this brief guide, we will go through the steps on how to remove and replace the cabin fan in the Renault Clio. First, open the car's bonnet and st…
Disassembly of the Renault Clio cabin fan
Disassembly of the Renault Clio cabin fan
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will see the main instructions on how to disassemble and replace the cabin fan of the Renault Clio. First of all, we get on board t…
Repair and Removal of Cabin Fan on Renault Clio 3
Repair and Removal of Cabin Fan on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, see how to repair the cabin fan of a Renault Clio third series. First, disconnect the two battery terminals; then access the inside of…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos