Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter is a crucial task for your 2009 Renault Clio as it helps improve engine reliability. Below are the necessary steps.

However, remember that the entire procedure must be carried out with the engine off and sufficiently cool for safety reasons. Once you have taken the necessary precautions, fully lift the bonnet and locate the filter box at the top of the engine compartment.

Remove the cover and proceed with replacing the filter. Finally, replace the cover and close the bonnet.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the 2012 Renault Clio
How to Replace the Air Filter of the 2012 Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the engine air filter of your 2012 Renault Clio III is quite simple. Follow the procedure below to complete the task without any difficulty…
How to Replace the Air Filter on Renault Clio
How to Replace the Air Filter on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the air filter on a Renault Clio: open the car door, pull up the engine compartment release lever located at the bottom left of the dashbo…
How to Change the Engine Air Filter on a Renault Clio 4
How to Change the Engine Air Filter on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the engine air filter on your Renault Clio fourth generation by yourself, you only need a few minutes. All you have to do is read the foll…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos