Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Air Filter Replacement

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Air filter

See other generations:
This video is currently unavailable

The engine air filter housing is located at the top of the engine. Remove the plastic cover and unscrew the screws that hold the two parts of the filter box together.

Extract the old filter and ensure there are no dirt residues inside the filter box. If necessary, remove them using a vacuum cleaner rather than compressed air to avoid risking them entering the intake duct. Insert the new filter, ensuring the seal fits perfectly.

Close the filter box and reposition the plastic cover on the engine.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Replacement of Engine Air Filter
Replacement of Engine Air Filter
Renault Clio (1998-2005 / MK 2, Clio 2) The engine air filter housing (airbox) is located directly above the engine and not to the side as in many vehicles: to access the filter housing, it…
Replacing the Air Filter on a Clio 4
Replacing the Air Filter on a Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Let’s look at replacing an air filter on a Renault Clio 4. Lift the front bonnet of the car, locate the filter housing and begin disassembling the co…
Replacing the Air Filter on a Renault Clio
Replacing the Air Filter on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) How do you replace the air filter on a Clio? Let's look at removing the engine air filter from its designated space. Open the engine bay and locate w…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos